Photocells and safety devices

IRIS. ADJUSTABLE PHOTOCELLS

IRIS. LATEST GENERATION ADJUSTABLE PHOTOCELLS

The IRIS adjustable photocells allow you to detect obstacles on the optical axis between transmitter (TX) and receiver (RX) with a range of up to 30 m.

State-of-the-art: The photocell is housed on a rotating support equipped with a high-performance lens designed to optimize beam efficiency in any direction. The rotating support is locked in the desired position thanks to a resistant rotation lock with screw clamping (if necessary removable with a screwdriver). The alignment is reported by a led on the receiver.

The Fresnel type high performance optic is easily adjustable on frictioned and self-locking joints both horizontally, being able to rotate 180 ° (± 90 °), or vertically with a possible rotation of ± 10 °. The optic is completely independent of the electronic board, this greatly facilitates the orientation when the wiring is already performed.

Double relay equipment with series exchanges, the NC contact and the photo test function make it conform to the standards of category 3 of UNI EN ISO 13849-1 (update of EN 954-1). Possibility to connect up to 8 pairs of photocells by synchronizing the transmission (multiplexed system) without interference. The selection is made by 4-way dip-switches placed both on the transmitter and on the receiver.

IR transmission with advanced digital protocol that guarantees maximum efficiency, disturbance immunity and reduced consumption. Reinforced power supply to tolerate voltages up to 35Vdc or 30Vac.

T.CO.O-R.CO.O DOUBLE

Radio system for mechanical and 8,2kΩ safety edges.

T.CO.O-R.CO.O Double Bidirectional radio band 868 MHz for the connection of mechanical or resistive safety edges. Devices in watertight box for the external installation. R.CO.O Double is also available with simple box.

Mechanical safety edges

BS01 Yellow black high profile (70 mm) mechanical safety edges for gates.
BS01-C15 - Assembled mechanical safety edge for gates, L=1.5m
BS01-C20 - Assembled mechanical safety edge for gates, L=2.0m.
BS01-C25 - Assembled mechanical safety edge for gates, L=2.5m

CP30 Black low profile (30 mm) mechanical safety edges for bascule door.
CP30 - Set with 2 profile spools each 20 m and 20 pieces aluminium bar each L=2 m.
CP30-K40 - Assembling kit for a single 4m safety edge.
CP30-K60 - Assembling kit for a single 6m safety edge.
CP30-C25 - Assembled mechanical safety edge for bascule door, L 2.5 m.
CP30-C30 - Assembled mechanical safety edge for bascule door, L 3.0 m.
CP30-C35 - Assembled mechanical safety edge for bascule door, L 3.5 m.

FTALL7

FTALL7. Photocells (TX / RX) infrared modulated light, range up to 25m and new sophisticated pcb designed to ensure the maximim Immunity to disturbances and interference. Synchronized photocells
Available also the small small columns with double height in case of installations on area with heavy goods vehicles

FT 00/7

FT00/7. Photocells (TX / RX) infrared modulated light, selectable range up to 30m and new sophisticated pcb designed to ensure the maximim Immunity to disturbances and interference, with the new light guide in board of the receiver. Synchronized photocells
Available also the small small columns with double height in case of installations on area with heavy goods vehicles

FTC

Ultrathin extruded aluminium columns, functional with great design.
Single parts.

FTC 60N: H 60 mm for 1 photocell + mobile support.
FTC 110N: H 110 mm for 2 photocells + mobile support.

SRAY-A

Active IR barrier for the protection of the external boundaries of doors and windows. Thanks to its small Dim, it can be placed between the window and the shutters. Easy to install, it guarantees a total protection against intrusion, even when the windows are open.
Power supply: 12 Vdc/Vac.
Maximum range: 8 m.
Aluminium extruded black box.
2 ray version, length 500 mm SRAY-A 0.5.
4 ray version, length 1000 mm SRAY-A 1.0.
6 ray version, length 1500 mm SRAY-A 1.5.
8 ray version, length 2000 mm SRAY-A 2.0.
Version with tamper in the connection cap.

FT ANTIVANDAL

Adjustable photocell anti-vandal
Available in 3 versions:
- FT ANTIVANDAL;
- FT ANTIVANDAL B: battery power supply;
- FT ANTIVANDAL 40m: with range up to 40m.

Dimensions (mm): 103x48x41.
Dimensions FT ANTIVANDAL 40m (mm): 130x50x62.

AFT25B

Battery photocells
2 batteries 3,6V 2,7Ah are required.
Batteries not included

FT-RIF

Reflection photocells
Power supply 12-240 Vac/dc.

AFT30

Outdoor single channel photocell AFT30 and box L40 for built-in installation

T.CO.O-R.CO.O

Radio system for mechanical and 8,2kΩ safety edges.

T.CO.O-R.CO.O Bidirectional radio band 868 MHz for the connection of mechanical or resistive safety edges. Devices in watertight box for the external installation. R.CO.O is also available with simple box.

Mechanical safety edges

BS01 Yellow black high profile (70 mm) mechanical safety edges for gates.
BS01-C15 - Assembled mechanical safety edge for gates, L=1.5m
BS01-C20 - Assembled mechanical safety edge for gates, L=2.0m.
BS01-C25 - Assembled mechanical safety edge for gates, L=2.5m

CP30 Black low profile (30 mm) mechanical safety edges for bascule door.
CP30 - Set with 2 profile spools each 20 m and 20 pieces aluminium bar each L=2 m.
CP30-K40 - Assembling kit for a single 4m safety edge.
CP30-K60 - Assembling kit for a single 6m safety edge.
CP30-C25 - Assembled mechanical safety edge for bascule door, L 2.5 m.
CP30-C30 - Assembled mechanical safety edge for bascule door, L 3.0 m.
CP30-C35 - Assembled mechanical safety edge for bascule door, L 3.5 m.