Menu
The IRIS adjustable photocells allow you to detect obstacles on the optical axis between transmitter (TX) and receiver (RX) with a range of up to 30 m.
At the forefront: The Fresnel type high performance optic is easily adjustable on frictioned and self-locking joints both horizontally, being able to rotate 180° (± 90 °), or vertically with a possible rotation of ± 10°. The optic is completely independent of the electronic board, this greatly facilitates the orientation when the wiring is already performed.
Code
12005904
Frequency
Range
Coding
Movable part name
Fix part name
Frequency
Power supply movable part
Power supply fix part
Battery life
Compatible safety edges
Max distance betwenn devices
Max intervention time
R.CO.O radio memory storage
Input power supply
10...30 Vac - 10...35 Vdc
Power supply (TX wireless)
10...30 Vac - 10...35 Vdc
Nominal range
30m
Horizontal adjustment angle
-90°...+90°
Vertical adjustment angle
-10°...+10°
Absorption
Relay contact
1A 24 Vdc
Obstacle detection time
102.5 ms
Synchronized mode
yes (MAX 2 pairs)
Modulation frequency
100 kHz
Master code
Slave code
Standard operator0
Standard with 1 mechanical stop1
Standard with 2 mechanical stops2
Power supply
Motor power supply
Motor absorption
Maximum gate weight
Average absorption
Maximum gate weight/lenght
Dimensions
Weight
Capacitor
Speed
Maximum stem stroke
Maximum thrust
Opening time
Maximum thrust
Max speed (adjustable)
Boom maximum lenght
Chain maximum lenght
Height of the pillar
Boom diameter
Service
Daily cycles recommended
Guaranteed consecutive cycles
Working temperature
-10...+55 °C
Degree of protection
IP54
Optional accessories
Alimentatore / Power supply
Code movable part in watertight box
Code fix part in watertight box
Integrated led board
yes (6 leds, 3 x 4500mcd each side)
Tested on (cycles)
Control unit
Exclusive Structure and Extremely Compact Dimensions. Body Resistant to Atmospheric Events and Designed for Any Type of Installation
Double relay equipment with series exchanges, the NC contact and the photo test function make it conform to the standards of category 3 of UNI EN ISO 13849-1 (update of EN 954-1). Possibility to connect up to 8 pairs of photocells by synchronizing the transmission (multiplexed system) without interference.
The selection is made by 4-way dip-switches placed both on the transmitter and on the receiver. IR transmission with advanced digital protocol that guarantees maximum efficiency, disturbance immunity and reduced consumption.
Reinforced power supply to tolerate voltages up to 35Vdc or 30Vac.
P.IVA 00737950253 – Via dell’Artigiano, 1 – 32020 Borgo Valbelluna – Lentiai (BL) ITALY
Tel. +39 0437 751175 – Indirizzo Mail contact@allmatic.com